This is just one of many examples of how the Penn State Technical Assistance Program has helped manufacturers and business cut environmental and energy costs--
Based on the United Nations’ Sustainable Development Goals (SDGs), the plant also identified six focus areas for improvement: agriculture, water, packaging, product, climate, and people.
These were considered during the PennTAP assessment.
The facility began working with PennTAP advisors who focused their assessment on reducing the amount of water wasted at the facility.
They worked in collaboration with the Northeastern Pennsylvania Industrial Resource Center (NEPIRC) to review all aspects of one bottling line in a value stream mapping (VSM) exercise as part of an Economy, Energy, and Environment (E3) assessment.
VSM is a lean manufacturing tool designed to combine material processing steps with information flow. It helps users create a solid implementation plan that maximizes their available resources and ensures time and materials are used efficiently.
PennTAP first evaluated the plant’s water usage in every step of the 45-minute automated process to fill a bottle, which consists of the following steps: purification, batching, filling, pasteurizing, labeling, packing and palletizing.
Since the beverage product is mostly water, the water purification step is one of the most important in the process, and it requires sending a significant amount of water to the wastewater treatment system.
The bottling plant uses a reverse osmosis machine during the purification step to remove any contaminants from the water source. The machine recovers water at a rate of 80 percent, and the remaining 20 percent is concentrated with contaminants and sent to the wastewater treatment system. This waste (known as effluent) represents a significant amount of the water purchased by the plant.
Per PennTAP’s recommendation, the site installed a new reverse osmosis machine that is better sized for production levels and has greatly reduced the effluent from 20 percent to 11 percent. This also reduced the amount of water the plant needed to purchase.
In addition, PennTAP helped the site reduce the product yield loss by 20 percent.
The product yield loss includes loss between the filler and the palletizer at the site. The main sources of loss include overfilling at the fillers, mislabeling, quality rejects, and metal detection in product. The loss of product also includes product being sent as wastewater or thrown in the trash.
The bottler has plans to get a filler machine upgrade in 2021 to achieve even greater results.
PennTAP advisors also brought students from Penn State’s College of Earth and Mineral Sciences on site. The energy engineering students completed a site assessment of the bottling plant’s natural gas usage.
PennTAP advisors estimated the savings for the replacement of the reverse osmosis machine to be 12,010,781 gallons of water and wastewater per year, with the cost savings being $85,132 in water costs and $75,065 in wastewater costs. These represent savings of approximately 7 percent for the site’s total cost for water and wastewater.
The savings for reducing the product yield loss were estimated to be 640,575 gallons of water, equivalent to $4,540 in water cost savings and $3,843 in wastewater savings.
PennTAP continues to support this beverage bottling plant with projects and plans to help the bottling plant pursue potential ideas for the Penn State Bernard M. Gordon Learning Factory senior engineering capstone design projects in the future.
This project was funded in part by the U.S. Environmental Protection Agency.
Click Here for other success stories.
For more information on assistance available to businesses of all types and upcoming workshops and webinars, visit the Penn State Technical Assistance Program website.
(Reprinted from the PennTAP website.)
Resource Link:
PA Small Business Development Centers: Environmental Assistance Program
[Posted: November 23, 2020] PA Environment Digest
No comments:
Post a Comment